Darkside EGR Delete Kit - 1.9 & 2.0 8v PD105 BLS / BRM & BMP / BMM EGR Delete / Race Pipe
Darkside EGR Delete Kit - 1.9 & 2.0 8v PD105 BLS / BRM & BMP / BMM EGR Delete / Race Pipe
- THIS IS A SPECIAL ORDER ITEM. Once you complete your order, we will then order it from the supplier. If you are urgently needing this item contact us for an accurate ETA from our supplier before purchasing!
Couldn't load pickup availability
EGR Delete Kit for 1.9 & 2.0 8v PD105 BLS / BMM TDI Engines
This will only fit engines with a 3 Piece EGR Valve (See photo 3 for details)
- Reduces inlet air temperatures = more power
- Prevents inlet and turbo from clogging up
- Brushed aluminium finish
- Made in the UK
This kit consists of:
- Darkside Developments Billet Alloy EGR Delete
- Genuine VW EGR Blanking Plate (for Turbo EGR Port)
- Genuine VW EGR Blanking Plate Gasket (for Turbo EGR Port)
- 2 x M8 Nuts (for Turbo EGR Port)
- Vented Grub Screw (Boost Guage Takeoff)
- Grub Screw (to block Boost Port)
- Nitrile O-Ring Seal
- L Shape Joiner + Clamps
This kit replaces the EGR Valve and fits neatly between the Anti Shudder Valve and Inlet Manifold. Retaining the ASV means the engine still remains smooth when switching off the ignition
Our EGR Delete Kit is machined from a Single Billet so there are no welds. This improves appearance and also strength. We have found that the kits from other suppliers crack due to the strain of the boost pipework hanging from the ASV, so we designed our item to overcome this problem
Our unique Grub Screw design allows for the neatest possible install, removing the bulky brass fitting found on other EGR Delete Kits. The tiny hole also eliminates the need to fit an 'in-line' reducer to stop the boost gauge from fluttering under heavy load. The design also means that customers who will not be using the boost takeoff will have a clean looking install
As our design is almost exactly the same profile as the standard EGR Valve, which allows all the stock fixings to be used
Please Note:
- This kit will only fit engines fitted with the 3 piece EGR Valve (See photo 3). Double check if your vehicle as a 2 or 3 piece EGR Valve before purchasing
- Once the valve is either removed or blanked off the vehicles ECU will no longer get a signal from the EGR Valve causing the emissions workshop light to appear on the dash board. We can remove this by reprogramming the EGR software on the ECU.
For more information on EGR Valves and Removal see here -https://www.darksidedevelopments.co.uk/egr-removal-delete/
