Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

$210.00 NZD

Sale Sold out

Taxes included. Shipping calculated at checkout.

THIS IS A SPECIAL ORDER ITEM. Once you complete your order, we will then order it from the supplier. If you are urgently needing this item contact us for an accurate ETA from our supplier before purchasing!

Size (LxWxH) 10 x 16 x 26 cm

Note Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts

Rear Control Arm Lower Rear - Outer Bushing Kit Double Offset to Suit Holden Commodore VE, VF and HSV

Details:

Foot Note 2: Adds +/-1.5deg camber

Foot Note 3: Limited Lifetime Warranty

Sub Brand: Replacement

Components Per: 8 Bushings, 4 Tubes

Fitting Position: outer

Wheel Alignment: Yes

Installation Difficulty: Tricky installation may take longer then you think if you are not experienced, we reccomend you use our click & fit service.

Installation time: 3 Hours

Kit Contents: 8 Bushings, 4 Tubes

Descriptions:

Benefit Note:

Providing +/- 1.5deg camber adjustment (on car), Whiteline's kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. Providing +/- 1.5deg camber adjustment (on car), WHITELINE'S kit is the economical solution for correcting alignment and prolonging tyre life especially on vehicles which are lowered, load carrying and/ or running expensive low profile tyres. *All prices shown on the Whiteline website include GST. You will not be charged any additional fees related to tax.

Vehicle Types;

Make/Model: CHEVROLET CAMARO, Chassis Group: 2009-2015 | CAMARO 5TH GEN, Important Note: Performance Alignment - adds +/- 1.5deg camber - replaces both control arm outer and trailing arm rear bushing
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE INTERCEPTOR RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VC RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VH RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VK RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HDT COMMODORE, Chassis Group: 2006-2013 | COMMODORE VL RETRO, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN CALAIS, Chassis Group: 2006-2013 | CALAIS VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN CAPRICE, Chassis Group: 2006-2013 | CAPRICE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN COMMODORE, Chassis Group: 2006-2013 | COMMODORE VE, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HOLDEN STATESMAN, Chassis Group: 2006-2010 | STATESMAN WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV CLUBSPORT, Chassis Group: 2006-2013 | CLUBSPORT E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV GRANGE, Chassis Group: 2007-2013 | GRANGE WM, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV GTS, Chassis Group: 2006-2013 | GTS E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV MALOO, Chassis Group: 2007-2013 | MALOO E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV SENATOR, Chassis Group: 2006-2013 | SENATOR E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: HSV W427, Chassis Group: 2008-2013 | W427 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts
Make/Model: VAUXHALL VXR8, Chassis Group: 2007-2013 | VXR8 E SERIES, Important Note: Performance Alignment - suits models to - 06/2009 without spherical bearing in lower hub - adds +/- 1.5deg camber - replaces both front and rear control arm outer mounts

View full details