Xspurt 1000cc High Resistance Long Nose Stubby Fuel Injector

$163.30 NZD

~~$163.30 NZD~~ $163.30 NZD

Sale Sold out

Taxes included. Shipping calculated at checkout.

THIS IS A SPECIAL ORDER ITEM. Once you complete your order, we will then order it from the supplier. If you are urgently needing this item contact us for an accurate ETA from our supplier before purchasing!

Injector Adapter Cap short adaptor with 11mm o-ring short adaptor with 14mm o-ring

Bottom Injector Extension 14mm o-ring lower adapter Japanese cushion lower adapter

Injector Connector Connector: Contact Wire Support 20 to 24AWG (0.518 to 0.205mm²)

Xspurt 1000cc long nose unmodified fuel injector

Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set.

1000cc/min at 3 bar (43.5psi)
Suitable for use with ethanol, methanol as well as most oil based fuels
Modern design offering extremely good idle control
Full injector deadtime/battery compensation information is supplied with each set of injectors
High impedance (high resistance) so no need to add ballast resistors on some ECUs
Can be supplied with lower adaptors to fit most 14mm lower o-ring applications
Unmodified bosch injector
Multi-hole spray pattern
Common replacement for EVO X Injectors
Also referred to as Bosch 980cc (at 3-bar) or 1150cc (at 4-bar)

Deadtime / battery compensation information supplied with each set of fuel injectors

Please note that non-standard injector length options are not available. Variations of injector caps will create 3/4 length and traditional full length injectors.

View full details